Baykon BX18 Weighing Indicator

BAYKON BX18 is a DIN rail mounted indicator to install in a cabinet for intensive dusty enviroment. It offers RS-232C, RS-485, Analogue output, Parallel port including 4 x Inputs and 6x Outputs, Modbus RTU fieldbus interfaces as standard.
Powerful calibration options including electronic calibration without test weights, span calibration of non-empty tanks support easy and fast installation and service. BX18 is featuring 10 step adaptive filter for fast settling, up to 999.999 display resolution and 1600 conversion per second.
Programming and calibration can be executed via device keys and by PC/PLC through serial ports and fieldbus. BX18 is powered by from 12-28 volt DC supply.


Butuh Bantuan?
Produk kami juga dapat dibeli melalui:

Informasi Produk


  • 14mm LED display
  • Up to 1600 convertion/sec
  • Calibration via keys and by PC/PLC through interfaces
  • Electronic calibration (eCAL) without test weights
  • Span calibration (sCAL) of non-empty tanks.

System integration

  • RS-232C serial port
  • RS-485 serial port
  • Modbus RTU
  • Analog selectable as 0-20mA, 4-20mA, 0-5 VDC and 10 VDC
  • Parallel I/O port as 4 x Inputs and 6 x Outputs
Linearity % 0.0015 FS
Temperature coefficient  2 ppm/°C
Display 6 digits, 7 segments, red, 14 mm high
Status annunciators Gross, net, motion, centre of zero, units (kg, g, t, lb, klb, N, kN)
Keyboard 5-key (function, GN, tare/clear, zero, print)
Key lock Keys can be locked against unauthorized access
Tiype (A/D Converter) 24 bit Delta – Sigma ADC
Conversion rate(A/D Converter) Up to 1600 conversions per second
Minimum input sensitivity (A/D Converter) 0.1 μV per interval
Analogue input range (A/D Converter) 0 mV to + 18 mV (unipolar) ; -18mV to +18mV (bipolar)
Resolution (A/D Converter) Internal up to 16.000.000; display up to 999.999 d
Type (D/A Converter) 16 bit D/A converter
Max. cable length  (D/A Converter) 300 meter
Max. load resistance (D/A Converter) 500 Ω
Calibration Standard: By etalon weights via keys or serial port via IndFace1x software
eCal: Electronic calibration without etalon weights
sCal: Span calibration of non-emptied tanks.
Digital filter 10 step adjustable adaptive digital filter
Weighing functions Tare, zero ing, auto zero tracking, motion detection, auto-zero at power-up
Other functions Label number, gross, tare indication
Digital outputs 6 set points with relay contact output.
Digital inputs 4 opto-isolated inp uts are programmable for zeroing, tare, clear, hold, peak, print etc.
RS-232C 1200 to 115200 baud, programmable
Continuous, Printer, BSI (Baykon Serial Interface) protocol
RS-485 1200 to 115200 baud, 8 none 1, 7 even 1, 7 odd 1, 8 even 1 or 8 odd 1, Up to 31 units on the bus1200 to 115200 baud, 8 none 1, 7 even 1, 7 odd 1, 8 even 1 or 8 odd 1, Up to 31 units on the bus
Modbus RTU 1200 to 115200 baud, 8 none 1, 8 even 1 or 8 odd 1, up to 31 units on the RS-485 bus
Analogue Programmable to 4 – 20 mA, 0 – 20 mA, 0 – 5 VDC or 0 – 10 VDC
Excitation 5 VDC, max. 100 mA
Number of load cells Up to 6 load cells 350 Ω or 18 load cells 1100 Ω in parallel
Connection 4 or 6 wire technique. Cable length 274 m/mm² for 6 wire connection
Operation temperature -15°C to +55°C; 85% RH max, non-condensing.
Enclosure Polycarbonate, mounting in standard DIN rails, IP20
89,7 mm x 107,6 mm x 62,2 mmPolycarbonate, mounting in standard DIN rails, IP20, 89,7 mm x 107,6 mm x 62,2 mm
Power Requirement 12 – 28 VDC, Max. 0.2 A
Berat 2000 g


Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “Baykon BX18 Weighing Indicator”

Hi, tim support kami ada di sini untuk menjawab kebutuhan Anda. Tanya kami apa saja!
WeCreativez WhatsApp Support
Jawa Barat
WeCreativez WhatsApp Support
Jakarta, Banten, Sumatra & Sulawesi
WeCreativez WhatsApp Support
Jawa Timur & Jawa Tengah